Best Polished Concrete in Friendswood

What a polished floor has to survive in Friendswood

• Friendswood straddles both Harris and Galveston counties within the Greater Houston metropolitan area. [1]
• The city began in 1895 as a Quaker colony, the only one that grew into a permanent Texas town, and stayed a small farming community of under 500 people through the 1940s before incorporating as a city in 1960 as Houston's suburbs reached it. [2]
• Friendswood was devastated by Hurricane Harvey in 2017 and flooded again during Hurricane Beryl in 2024; residents have since raised many homes onto elevated foundations to reduce flood damage. [3]
• Friendswood covers 20.90 square miles at an elevation of about 30 feet, low-lying Gulf Coast terrain that drains slowly after heavy rain. [4]

What’s driving demand in Friendswood

• 41,213 people: population, 2020 census [1]
• 41,030 people: population, 2024 estimate [2]
• approximately 14,900 households: households, 2024 estimate [3]

What “ranked” actually measures

• ANSI/ESD S20.20: static dissipative flooring tests from 1.0 x 10^6 to 1.0 x 10^9 ohms to ground, conductive flooring tops out at 1.0 x 10^6 ohms, and a person walking on it stays under 100 volts [source]
• ASTM F1869: a slab gets a calcium chloride moisture test before a moisture-sensitive coating goes down, and the coating manufacturer sets the pass limit [source]
• ICRI 310.2: surface prep is graded on a 1 to 9 CSP profile before an epoxy, urethane or MMA coating gets bonded to it [source]